Skip to main content
Chemical PumpsOklahoma

Chemical Pumps Oklahoma

By February 6, 2020February 1st, 2022No Comments
chemical pumps Oklahoma-3-

Chemical Pumps Oklahoma

Designed for industrial jobs where chemical compounds need pumped all day, this is what chemical pumps Oklahoma use is. Therefore, engineered materials used for the wetted end can pump any chemical, from acids to caustics. Moreover, even thick liquids and suspended solids can pump with accuracy.

Therefore, the diaphragm pump get rid of bad hydraulic systems and packing glands used in many pumps. Furthermore, large bearings and shafts, constantly lubricated with a tub of oil give years of reliable service. Then, precision bronze worm gears and metal worm pressure shafts convert motor rpms to linear piston pumping power. In addition, replacing worn components is quick and simple, and  complete with common tools.

Chemical Pumps Oklahoma

Moreover, chemical dosing pumps by means of Madden are heavy duty industrial grade. Then, by using popular industrial 56 frame motors and worm gear reducers. Therefore, these produce reliable pumping energy designed to supply many years of dependable service. Furthermore, rugged aluminum tools container and pump body castings, precision machined and bolted assembly. Then, wet the end parts made from a selection of corrosion resistant materials. Furthermore, thick Nylon bolstered diaphragms for tough pumping service.

Chemical Pumps Oaklahoma

However, the Madden diaphragm type chemical dosing pumps are positive displacement chemicals that enable the operator to modify the displacement of the pump which adjustments the output rate. Then, the madden pumps are kind pumps that use a piston to routinely cross a rubber diaphragm that is the barrier isolating the liquid from the inner workings of the pump.

Then, as the eccentric moves forward the piston pushes forward, alongside with the diaphragm. Next, the liquid that is in the wetted stop of the pump is pushed out thru the discharge test valve and into the piping going to the industrial process. Therefore, as the eccentric continues to rotate through a 360-degree cycle it will subsequently push the piston rod rearward. Which, pulls the diaphragm rearward.